logo
Logo
Giỏ hàng cart
...
Hotline mua hàng
...
Tư vấn chọn mua
24-Port GE PoE Smart Switch CISCO CBS220-24P-4G-EU-1
24-Port GE PoE Smart Switch CISCO CBS220-24P-4G-EU-1
Mô tả:

24-Port GE PoE Smart Switch CISCO CBS220-24P-4G-EU

... Hàng chính hãng

Tình trạng: Hàng chính hãng, có CO CQ đầy đủ
Cám ơn bạn đã gửi thông tin liên hệ.
ĐIỀN THÔNG TIN, ĐỂ NHẬN BÁO GIÁ SẢN PHẨM NÀY !
Mô tả:
Kho hàng:
Liên hệ
Mua nhiều:
Khách hàng cần mua số lượng vui lòng liên hệ 0777621381 - 0396827937 để có giá tốt.
Vận chuyển:

Giao hàng toàn quốc. Chúng tôi sử dụng các dịch vụ giao hàng và thanh toán tại nhà (COD) của Giaohangtietkiem, Viettel Post, GHN và những dịch vụ khác để giao hàng đến quý khách hàng trong thời gian sớm nhất.

Sản phẩm cùng thương hiệu

Tại sao chọn phatsongwifi.com ?

  • delivery
    Giao hàng & thu tiền tận nơi trên toàn quốc
  • delivery
    Đổi trả trong vòng 7 ngày (Chỉ áp dụng cho một số sản phẩm)
  • delivery
    Cam kết bảo hành đúng như mô tả của sản phẩm.
  • delivery
    Nhà cung cấp giải pháp mạng và wifi chuyên nghiệp.
  • delivery
    Hàng đúng như mô tả và sản phẩm luôn đạt chất lượng tốt nhất.
  • delivery
    Mua hàng và tư vấn
  • delivery
    Chăm sóc khách hàng

24-Port Gigabit Ethernet PoE Smart Switch CISCO CBS220-24P-4G-EU

- Total system ports: 28 Gigabit Ethernet.

- Support 24-port PoE Gigabit Ethernet and 4-port Gigabit Ethernet SFP.

- Number of Ports That Support PoE: 24.

- MAC table: Up to 8.192 Media Access Control (MAC) addresses.

- Flash: 64MB.

- CPU memory: 256MB.

- PoE Power Budget: 195W.

- Dimensions (W x D x H): 440 x 257 x 44 mm.

- Weight: 4.07kg.

Đặc tính kỹ thuật 

Model CBS220-24P-4G-EU
Performance
Switching capacity Forwarding rate in millions of packets per second (mpps; 64-byte packets): 41.66
Switching capacity in Gigabits per second (Gbps): 56
Layer 2 switching
MAC table Up to 8,192 Media Access Control (MAC) addresses
Spanning Tree Protocol (STP) Standard 802.1d Spanning Tree support, enabled by default
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP])
Multiple Spanning Tree instances using 802.1s (MSTP)
16 instances are supported
Port grouping Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
   + Up to 8 groups
   + Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
Load balance based on source and destination MAC address, or source and destination MAC/IP
VLAN Support for up to 256 Virtual Local Area Networks (VLANs) simultaneously
Port-based and 802.1Q tag-based VLANs
Management VLAN
Guest VLAN
Auto voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS
QinQ VLAN VLANs transparently cross a service provider network while isolating traffic among customers
Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) Protocols for automatically propagating and configuring VLANs in a bridged domain
Head-of-Line (HOL) blocking HOL blocking prevention
Jumbo frame Frame sizes up to 9,216 supported
Loopback detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP.
Automatic Media-Dependent Interface Crossover (MDIX) Automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight-through) is installed
Security
ACLs Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, Transmission Control Protocol (TCP)/ User Datagram Protocol (UDP) source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, Internet Group Management Protocol (IGMP) packets, TCP flag
Support up to 512 rules
Port security Creates the ability to lock source MAC addresses to ports; limits the number of learned MAC addresses
IEEE 802.1X (authenticator role) 802.1X: Remote Authentication Dial-in User Service (RADIUS) authentication; guest VLAN;
Single-host, multiple-host, and multisession mode
RADIUS, TACACS+ Supports RADIUS and Terminal Access Controller Access Control System (TACACS) authentication; switch functions as a client
MAC address filtering Supported
Storm control Broadcast, multicast, and unknown unicast
DoS protection DOS attack prevention
STP Bridge Protocol Data Unit (BPDU) Guard This security mechanism protects the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port.
Spanning Tree Loop Guard This feature provides additional protection against Layer 2 forwarding loops (STP loops).
Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. SCP also uses SSH. SSH v1 and v2 are supported.
Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
QoS
Priority levels 8 hardware queues per port
Scheduling Strict priority and Weighted Round-Robin (WRR) queue assignment based on DSCP and class of service (802.1p/CoS)
Class of service Port-based; 802.1p VLAN priority-based; IPv4/v6 IP precedence, Type of Service (ToS), and DSCP-based; Differentiated Services (DiffServ); classification and re-marking ACLs, trusted QoS
Rate limiting Ingress policer; egress shaping and rate control; per VLAN, per port, and flow-based
Congestion avoidance A TCP congestion avoidance algorithm is required to reduce and prevent global TCP loss synchronization
Multicast
Internet Group Management Protocol (IGMP) Versions 1, 2, and 3 Snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups
IGMP querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
Standards
Standards IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad LACP, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN, IEEE 802.1w RSTP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, RFC 768, Request for Comments (RFC) 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1157, RFC 1350, RFC 1533, RFC 1541, RFC 1624, RFC 1700, RFC 1867, RFC 2030, RFC 2616, RFC 2131, RFC 2132, RFC 3164, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 2576, RFC 4330, RFC 1213, RFC 1215, RFC 1286, RFC 1442, RFC 1451, RFC 1493, RFC 1573, RFC 1643, RFC 1757, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2233, RFC 2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 1157, RFC 1493, RFC 1215, RFC 3416
IPv6
IPv6 IPv6 host mode
IPv6 over Ethernet
IPv6/IPv4 Dual Stack
IPv6 neighbor and router discovery (ND)
IPv6 stateless address auto-configuration
Path Maximum Transmission Unit (MTU) discovery
Duplicate Address Detection (DAD)
ICMP version 6
IPv6 ACL Drop or rate limit IPv6 packets in hardware
IPv6 QoS Prioritize IPv6 packets in hardware
Multicast Listener Discovery (MLD v1/2) Snooping Deliver IPv6 multicast packets only to the required receivers
IPv6 applications Web/SSL, Telnet server/SSH, DHCP Client, DHCP Autoconfig, Cisco Discovery Protocol (CDP), Link Layer Discovery Protocol (LLDP)
IPv6 Requests for Comments (RFCs) supported RFC 4443 (which obsoletes RFC2463) - ICMP version 6
RFC 4291 (which obsoletes RFC 3513) - IPv6 address architecture
RFC 4291 - IPv6 addressing architecture
RFC 2460 - IPv6 specification
RFC 4861 (which obsoletes RFC 2461) - Neighbor discovery for IPv6
RFC 4862 (which obsoletes RFC 2462) - IPv6 stateless address auto-configuration
RFC 1981 - Path MTU discovery
RFC 4007 - IPv6 scoped address architecture
RFC 3484 - Default address selection mechanism
Management
Cisco Business Dashboard Support direct management with Cisco Business Dashboard and mobile app. Eliminates the need to set up a separate hardware or virtual machine for the Cisco Business Dashboard Probe on site.
Cisco Business mobile app Mobile app for Cisco Business Switch and Wireless products. Helps to set up a local network in minutes and provide easy management at your fingertips.
Cisco Network Plug and Play (PnP) agent The Cisco Network Plug and Play solution provides a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or for provisioning updates to an existing network. The solution provides a unified approach to provision Cisco routers, switches, and wireless devices with a zero touch deployment experience.
Supports Cisco PnP Connect
Web user interface Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports configuration, system dashboard, system maintenance, and monitoring
Text-editable config files Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment
Command-line interface Scriptable CLI; a full CLI is supported. User privilege levels 1 and 15 are supported for the CLI
SNMP Simple Management Network Protocol (SNMP) versions 1, 2c, and 3 with support for traps, and SNMP version 3 User-based Security Model (USM)
Remote Monitoring (RMON) Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis
IPv4 and IPv6 dual stack Coexistence of both protocol stacks to ease migration
Port mirroring Traffic on a port or VLAN can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 8 source ports can be mirrored to one destination port. Four sessions are supported
Firmware upgrade Web browser upgrade (HTTP/HTTPS) and Trivial File Transfer Protocol (TFTP)
Dual images for resilient firmware upgrades
DHCP (Option 12, 66, 67, 82, 129, and 150) DHCP options facilitate tighter control from a central point (DHCP server) to obtain IP address, auto-configuration (with configuration file download), DHCP relay, and hostname
Time synchronization Simple Network Time Protocol (SNTP)
Login banner Configurable multiple banners for web as well as CLI
Other management HTTP/HTTPS; TFTP upgrade; DHCP client; Bootstrap Protocol (BOOTP); cable diagnostics; ping; traceroute; syslog
Discovery
Bonjour The switch advertises itself using the Bonjour protocol
Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-MED Extensions LLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones
Cisco Discovery Protocol The switch advertises itself using the Cisco Discovery Protocol. Displays brief information for connected Cisco network devices, IP phones, and wireless access points
Power efficiency
EEE compliance (802.3az) Support 802.3az Energy Efficient Ethernet on all ports; substantially reduce the power consumption when link bandwidth is not at full utilization
Energy Detect Automatically turns power off on Gigabit Ethernet and 10/100 RJ-45 ports when detecting a link down
Active mode is resumed without loss of any packets when the switch detects the link up
Disable port LEDs LEDs can be manually turned off to save on energy.
Time-based PoE PoE power can be on or off based on user-defined schedule to save energy
Time-based port operation Link up or down based on user-defined schedule (when the port is administratively up)
Power over Ethernet
PoE Power Budget 195 W
Number of Ports That Support PoE 24
Pre-standard PoE Support Cisco Pre-Standard PoE
Intelligent PoE power management Support the granular power negotiation with CDP/LLDP communication with PD devices after IEEE classification
Hardware
Buttons Reset button
Cabling type Unshielded Twisted Pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5
Ethernet or better for 1000BASE-T
LEDs System, Link/Act, Speed
Flash 64 MB
CPU memory 256 MB
Ports Total system ports: 28 Gigabit Ethernet
RJ-45 ports: 24 Gigabit Ethernet
Uplink ports: 4 Gigabit Ethernet SFP
Packet buffer 4.1 Mb
Environmental
Unit dimensions (W x D x H) 440 x 257 x 44 mm
Unit weight 4.07 kg
Power 100-240 V, 50-60 Hz
Certifications UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A, C-tick
Operating temperature 0-50° C
Storage temperature -20° C to +70° C
Operating humidity 10% to 90%, relative, noncondensing
Storage humidity 10% to 90%, relative, noncondensing
Power Consumption System power consumption:
110V=30.2W
220V=30.4W
Power consumption (with PoE):
110V=244.3W
220V=240.3W
Heat dissipation (BTU/hr): 833.59
Acoustic Noise and Mean Time Between Failure (MTBF) Fan (number):2
Acoustic noise: 25°C: 42.7 dB
MTBF @ 25°C (hours): 587,473

- Bảo hành: 12 tháng.

 

Xem thêm

24-Port Gigabit Ethernet PoE Smart Switch CISCO CBS220-24P-4G-EU

- Total system ports: 28 Gigabit Ethernet.

- Support 24-port PoE Gigabit Ethernet and 4-port Gigabit Ethernet SFP.

- Number of Ports That Support PoE: 24.

- MAC table: Up to 8.192 Media Access Control (MAC) addresses.

- Flash: 64MB.

- CPU memory: 256MB.

- PoE Power Budget: 195W.

- Dimensions (W x D x H): 440 x 257 x 44 mm.

- Weight: 4.07kg.

Đặc tính kỹ thuật 

Model CBS220-24P-4G-EU
Performance
Switching capacity Forwarding rate in millions of packets per second (mpps; 64-byte packets): 41.66
Switching capacity in Gigabits per second (Gbps): 56
Layer 2 switching
MAC table Up to 8,192 Media Access Control (MAC) addresses
Spanning Tree Protocol (STP) Standard 802.1d Spanning Tree support, enabled by default
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP])
Multiple Spanning Tree instances using 802.1s (MSTP)
16 instances are supported
Port grouping Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
   + Up to 8 groups
   + Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
Load balance based on source and destination MAC address, or source and destination MAC/IP
VLAN Support for up to 256 Virtual Local Area Networks (VLANs) simultaneously
Port-based and 802.1Q tag-based VLANs
Management VLAN
Guest VLAN
Auto voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS
QinQ VLAN VLANs transparently cross a service provider network while isolating traffic among customers
Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) Protocols for automatically propagating and configuring VLANs in a bridged domain
Head-of-Line (HOL) blocking HOL blocking prevention
Jumbo frame Frame sizes up to 9,216 supported
Loopback detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP.
Automatic Media-Dependent Interface Crossover (MDIX) Automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight-through) is installed
Security
ACLs Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, Transmission Control Protocol (TCP)/ User Datagram Protocol (UDP) source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, Internet Group Management Protocol (IGMP) packets, TCP flag
Support up to 512 rules
Port security Creates the ability to lock source MAC addresses to ports; limits the number of learned MAC addresses
IEEE 802.1X (authenticator role) 802.1X: Remote Authentication Dial-in User Service (RADIUS) authentication; guest VLAN;
Single-host, multiple-host, and multisession mode
RADIUS, TACACS+ Supports RADIUS and Terminal Access Controller Access Control System (TACACS) authentication; switch functions as a client
MAC address filtering Supported
Storm control Broadcast, multicast, and unknown unicast
DoS protection DOS attack prevention
STP Bridge Protocol Data Unit (BPDU) Guard This security mechanism protects the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port.
Spanning Tree Loop Guard This feature provides additional protection against Layer 2 forwarding loops (STP loops).
Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. SCP also uses SSH. SSH v1 and v2 are supported.
Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
QoS
Priority levels 8 hardware queues per port
Scheduling Strict priority and Weighted Round-Robin (WRR) queue assignment based on DSCP and class of service (802.1p/CoS)
Class of service Port-based; 802.1p VLAN priority-based; IPv4/v6 IP precedence, Type of Service (ToS), and DSCP-based; Differentiated Services (DiffServ); classification and re-marking ACLs, trusted QoS
Rate limiting Ingress policer; egress shaping and rate control; per VLAN, per port, and flow-based
Congestion avoidance A TCP congestion avoidance algorithm is required to reduce and prevent global TCP loss synchronization
Multicast
Internet Group Management Protocol (IGMP) Versions 1, 2, and 3 Snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups
IGMP querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
Standards
Standards IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad LACP, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN, IEEE 802.1w RSTP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, RFC 768, Request for Comments (RFC) 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1157, RFC 1350, RFC 1533, RFC 1541, RFC 1624, RFC 1700, RFC 1867, RFC 2030, RFC 2616, RFC 2131, RFC 2132, RFC 3164, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 2576, RFC 4330, RFC 1213, RFC 1215, RFC 1286, RFC 1442, RFC 1451, RFC 1493, RFC 1573, RFC 1643, RFC 1757, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2233, RFC 2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 1157, RFC 1493, RFC 1215, RFC 3416
IPv6
IPv6 IPv6 host mode
IPv6 over Ethernet
IPv6/IPv4 Dual Stack
IPv6 neighbor and router discovery (ND)
IPv6 stateless address auto-configuration
Path Maximum Transmission Unit (MTU) discovery
Duplicate Address Detection (DAD)
ICMP version 6
IPv6 ACL Drop or rate limit IPv6 packets in hardware
IPv6 QoS Prioritize IPv6 packets in hardware
Multicast Listener Discovery (MLD v1/2) Snooping Deliver IPv6 multicast packets only to the required receivers
IPv6 applications Web/SSL, Telnet server/SSH, DHCP Client, DHCP Autoconfig, Cisco Discovery Protocol (CDP), Link Layer Discovery Protocol (LLDP)
IPv6 Requests for Comments (RFCs) supported RFC 4443 (which obsoletes RFC2463) - ICMP version 6
RFC 4291 (which obsoletes RFC 3513) - IPv6 address architecture
RFC 4291 - IPv6 addressing architecture
RFC 2460 - IPv6 specification
RFC 4861 (which obsoletes RFC 2461) - Neighbor discovery for IPv6
RFC 4862 (which obsoletes RFC 2462) - IPv6 stateless address auto-configuration
RFC 1981 - Path MTU discovery
RFC 4007 - IPv6 scoped address architecture
RFC 3484 - Default address selection mechanism
Management
Cisco Business Dashboard Support direct management with Cisco Business Dashboard and mobile app. Eliminates the need to set up a separate hardware or virtual machine for the Cisco Business Dashboard Probe on site.
Cisco Business mobile app Mobile app for Cisco Business Switch and Wireless products. Helps to set up a local network in minutes and provide easy management at your fingertips.
Cisco Network Plug and Play (PnP) agent The Cisco Network Plug and Play solution provides a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or for provisioning updates to an existing network. The solution provides a unified approach to provision Cisco routers, switches, and wireless devices with a zero touch deployment experience.
Supports Cisco PnP Connect
Web user interface Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports configuration, system dashboard, system maintenance, and monitoring
Text-editable config files Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment
Command-line interface Scriptable CLI; a full CLI is supported. User privilege levels 1 and 15 are supported for the CLI
SNMP Simple Management Network Protocol (SNMP) versions 1, 2c, and 3 with support for traps, and SNMP version 3 User-based Security Model (USM)
Remote Monitoring (RMON) Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis
IPv4 and IPv6 dual stack Coexistence of both protocol stacks to ease migration
Port mirroring Traffic on a port or VLAN can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 8 source ports can be mirrored to one destination port. Four sessions are supported
Firmware upgrade Web browser upgrade (HTTP/HTTPS) and Trivial File Transfer Protocol (TFTP)
Dual images for resilient firmware upgrades
DHCP (Option 12, 66, 67, 82, 129, and 150) DHCP options facilitate tighter control from a central point (DHCP server) to obtain IP address, auto-configuration (with configuration file download), DHCP relay, and hostname
Time synchronization Simple Network Time Protocol (SNTP)
Login banner Configurable multiple banners for web as well as CLI
Other management HTTP/HTTPS; TFTP upgrade; DHCP client; Bootstrap Protocol (BOOTP); cable diagnostics; ping; traceroute; syslog
Discovery
Bonjour The switch advertises itself using the Bonjour protocol
Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-MED Extensions LLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones
Cisco Discovery Protocol The switch advertises itself using the Cisco Discovery Protocol. Displays brief information for connected Cisco network devices, IP phones, and wireless access points
Power efficiency
EEE compliance (802.3az) Support 802.3az Energy Efficient Ethernet on all ports; substantially reduce the power consumption when link bandwidth is not at full utilization
Energy Detect Automatically turns power off on Gigabit Ethernet and 10/100 RJ-45 ports when detecting a link down
Active mode is resumed without loss of any packets when the switch detects the link up
Disable port LEDs LEDs can be manually turned off to save on energy.
Time-based PoE PoE power can be on or off based on user-defined schedule to save energy
Time-based port operation Link up or down based on user-defined schedule (when the port is administratively up)
Power over Ethernet
PoE Power Budget 195 W
Number of Ports That Support PoE 24
Pre-standard PoE Support Cisco Pre-Standard PoE
Intelligent PoE power management Support the granular power negotiation with CDP/LLDP communication with PD devices after IEEE classification
Hardware
Buttons Reset button
Cabling type Unshielded Twisted Pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5
Ethernet or better for 1000BASE-T
LEDs System, Link/Act, Speed
Flash 64 MB
CPU memory 256 MB
Ports Total system ports: 28 Gigabit Ethernet
RJ-45 ports: 24 Gigabit Ethernet
Uplink ports: 4 Gigabit Ethernet SFP
Packet buffer 4.1 Mb
Environmental
Unit dimensions (W x D x H) 440 x 257 x 44 mm
Unit weight 4.07 kg
Power 100-240 V, 50-60 Hz
Certifications UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A, C-tick
Operating temperature 0-50° C
Storage temperature -20° C to +70° C
Operating humidity 10% to 90%, relative, noncondensing
Storage humidity 10% to 90%, relative, noncondensing
Power Consumption System power consumption:
110V=30.2W
220V=30.4W
Power consumption (with PoE):
110V=244.3W
220V=240.3W
Heat dissipation (BTU/hr): 833.59
Acoustic Noise and Mean Time Between Failure (MTBF) Fan (number):2
Acoustic noise: 25°C: 42.7 dB
MTBF @ 25°C (hours): 587,473

- Bảo hành: 12 tháng.

 

Xem thêm
Xem thêm
Xem thêm

Vận chuyển

  • BP. Giao hàng sẽ chốt đơn hàng, xác nhận lại đơn hàng và sẽ liên kết với các đơn vị vận chuyển như GHN, Giao Hàng Tiết Kiệm, Viettel Post ... để giao hàng đến quý khách hàng trong thời gian nhanh nhất.
  • Tùy vào nhu cầu khách hàng có thể lựa chọn vận chuyển nhanh, hỏa tốc hay vận chuyển bình thường. Các cước phí sẽ được thông báo đến khách hàng trước khi gửi hàng.

Cước phí vận chuyển

  • Miễn phí với các đơn hàng trong phạm vi giao hàng gần tại TP. Hồ Chí Minh.
  • Miễn phí với các đơn hàng giá trị cao toàn quốc.
  • Tính phí giao hàng với đơn hàng vận chuyển xa trong phạm vi TP. Hồ Chí Minh
  • Tính cước phí giao hàng với đơn hàng giá trị thấp toàn quốc.
  • Thông báo cước phí vận chuyển trước khi gửi hàng bảo hành sản phẩm đến khách hàng ở xa hoặc khách hàng có nhu cầu gửi cho đơn vị vận chuyển nhận dùm.

Chính sách đổi sản phẩm

  • Sản phẩm đổi trả phải trong tình trạng còn nguyên vẹn.
  • Được đổi sản phẩm cùng giá tiền hoặc cao hơn giá trị sản phẩm trước đó đã mua.
  • Được đổi trả sản phẩm đối với các sản phẩm được áp dụng chế độ dùng thử 3 ngày.

Bảo hành

  • Tất cả các sản phẩm cửa hàng chúng tôi bán ra đều có bảo hành từ 1, 3, 6, 12, 24, 36 tháng tùy theo từng sản phẩm và qui định của hãng.
  • Sản phẩm bảo hành phải còn tình trạng nguyên vẹn, tem bảo hành còn nguyên có chữ ký trên tem bảo hành.
  • Không bảo hành các sản phẩm bị chập điện, vô nước, cháy nổ, sét đánh gây cháy nổ ...
  • Không bảo hành sản phẩm do người dùng úp firmware không đúng cách (bị lỗi vì sai firmware, úp firmware không đúng cách, đang úp rút điện ra, đang úp bị mất điện hay đang úp chưa xong vẫn ngắt điện hoặc reset giữa chừng ...) Tất cả các trường hợp này chúng tôi đều từ chối bảo hành.
  • Thời gian tiếp nhận để kiểm tra và thời gian trả bảo hành (nếu sản phẩm do lỗi kỹ thuật) sẽ được báo lại quý khách hàng ngay sau khi kiểm tra lỗi và xác định rõ nguyên nhân.
  • Khi khách hàng cần bảo hành sản phẩm khách hàng gửi trực tiếp đến cửa hàng và nhận lại sản phẩm bảo hành tại cửa hàng khi bảo hành hoàn thành.
  • Đối với khách hàng gửi bảo hành bằng đơn vị vận chuyển đến trung tâm bảo hành của chúng tôi phải có thông tin và tên khách hàng cùng với địa chỉ rõ ràng. Mọi chi phí vận chuyển sản phẩm đến và gửi trả sản phẩm khi bảo hành hoàn thành khách hàng chịu cước phí vận chuyển 100% nếu gửi dịch vụ vận chuyển.
Xem thêm
Mô tả sản phẩm
Xem thêm
Thông số kỹ thuật
Xem thêm
Ứng dụng sản phẩm
Xem thêm
Sản phẩm đi kèm
Xem thêm
Thanh toán & Bảo hành

Vận chuyển

  • BP. Giao hàng sẽ chốt đơn hàng, xác nhận lại đơn hàng và sẽ liên kết với các đơn vị vận chuyển như GHN, Giao Hàng Tiết Kiệm, Viettel Post ... để giao hàng đến quý khách hàng trong thời gian nhanh nhất.
  • Tùy vào nhu cầu khách hàng có thể lựa chọn vận chuyển nhanh, hỏa tốc hay vận chuyển bình thường. Các cước phí sẽ được thông báo đến khách hàng trước khi gửi hàng.

Cước phí vận chuyển

  • Miễn phí với các đơn hàng trong phạm vi giao hàng gần tại TP. Hồ Chí Minh.
  • Miễn phí với các đơn hàng giá trị cao toàn quốc.
  • Tính phí giao hàng với đơn hàng vận chuyển xa trong phạm vi TP. Hồ Chí Minh
  • Tính cước phí giao hàng với đơn hàng giá trị thấp toàn quốc.
  • Thông báo cước phí vận chuyển trước khi gửi hàng bảo hành sản phẩm đến khách hàng ở xa hoặc khách hàng có nhu cầu gửi cho đơn vị vận chuyển nhận dùm.

Chính sách đổi sản phẩm

  • Sản phẩm đổi trả phải trong tình trạng còn nguyên vẹn.
  • Được đổi sản phẩm cùng giá tiền hoặc cao hơn giá trị sản phẩm trước đó đã mua.
  • Được đổi trả sản phẩm đối với các sản phẩm được áp dụng chế độ dùng thử 3 ngày.

Bảo hành

  • Tất cả các sản phẩm cửa hàng chúng tôi bán ra đều có bảo hành từ 1, 3, 6, 12, 24, 36 tháng tùy theo từng sản phẩm và qui định của hãng.
  • Sản phẩm bảo hành phải còn tình trạng nguyên vẹn, tem bảo hành còn nguyên có chữ ký trên tem bảo hành.
  • Không bảo hành các sản phẩm bị chập điện, vô nước, cháy nổ, sét đánh gây cháy nổ ...
  • Không bảo hành sản phẩm do người dùng úp firmware không đúng cách (bị lỗi vì sai firmware, úp firmware không đúng cách, đang úp rút điện ra, đang úp bị mất điện hay đang úp chưa xong vẫn ngắt điện hoặc reset giữa chừng ...) Tất cả các trường hợp này chúng tôi đều từ chối bảo hành.
  • Thời gian tiếp nhận để kiểm tra và thời gian trả bảo hành (nếu sản phẩm do lỗi kỹ thuật) sẽ được báo lại quý khách hàng ngay sau khi kiểm tra lỗi và xác định rõ nguyên nhân.
  • Khi khách hàng cần bảo hành sản phẩm khách hàng gửi trực tiếp đến cửa hàng và nhận lại sản phẩm bảo hành tại cửa hàng khi bảo hành hoàn thành.
  • Đối với khách hàng gửi bảo hành bằng đơn vị vận chuyển đến trung tâm bảo hành của chúng tôi phải có thông tin và tên khách hàng cùng với địa chỉ rõ ràng. Mọi chi phí vận chuyển sản phẩm đến và gửi trả sản phẩm khi bảo hành hoàn thành khách hàng chịu cước phí vận chuyển 100% nếu gửi dịch vụ vận chuyển.
Xem thêm

Sản phẩm cùng thương hiệu

Sản phẩm bán chạy (Top sale)

Wifi chuyên dụng
Wifi chuyên dụng
Switch
Switch
Router
Router
UTM/Firewall
UTM/Firewall
Cáp mạng và phụ kiện
Cáp mạng và phụ kiện
Màn hình (LCD)
Màn hình (LCD)
Lưu trữ - NAS, SAN
Lưu trữ - NAS, SAN
SFP, SFP+, QSFP ...
SFP, SFP+, QSFP ...
Chuyên cung cấp thiết bị CNTT của các hãng như Cisco, Fortinet, Ruckus, Aruba, HPE, Dell, Unifi, TP-Link ...
Địa chỉ: 888/67/4 Lạc Long Quân , P. 8, Q. Tân Bình, TP.HCM (liên hệ trước khi tới shop)