Phatsongwifi
Mỹ Thương hiệu: Cisco

Thiết bị phát sóng wifi Cisco AIR-AP1810W-S-K9

Hàng chính hãng
Giá: Liên hệ
Tình trạng
Hàng chính hãng, new 100%, fullbox
Part Number
Cisco AIR-AP1810W-S-K9
Kho hàng
Liên hệ
Mua nhiều
Khách hàng cần mua số lượng vui lòng liên hệ 0396827937 - 0396827937 - 0901188385 để có giá tốt.
Mô tả

Thiết bị phát wifi Cisco AIR-AP1810W-S-K9 có thiết kế sang trọng, nhỏ gọn có thể lắp đặt treo tường hoặc trần nhà, là sản phẩm lý tưởng cho bệnh viện, căn hộ hoặc văn phòng… Thiết bị phát wifi Cisco AIR-AP1810W-S-K9 kết hợp kết nối mạng Gigabit có dây cùng kế nối không dây tốc độ cao chuẩn 802.11ac Wave 2 vào một thiết bị nhỏ gọn, được thiết kế để tận dụng cơ sở hạ tầng cáp mạng có sẵn.

Vận chuyển

Giao hàng toàn quốc. Chúng tôi sử dụng các dịch vụ giao hàng và thanh toán tại nhà (COD) của Giaohangtietkiem, Viettel Post, GHN và những dịch vụ khác để giao hàng đến quý khách hàng trong thời gian sớm nhất.

Tổng quan và đặc điểm của sản phẩm

AIR-AP1810W-S-K9 là điểm truy cập thuộc dòng Wifi Cisco 1810W Catalyst. Wifi Cisco 1810 cung cấp một điểm truy cập nhỏ gọn, có thể gắn vào tấm tường, lý tưởng cho khách sạn, tàu du lịch, hội trường dân cư hoặc triển khai nhiều đơn vị ở khác. Cisco 1810W Series kết hợp kết nối không dây Gigabit Ethernet có dây và 802.11ac Wave 2 thành một thiết bị kiểu dáng đẹp, được xây dựng để tận dụng cơ sở hạ tầng cáp hiện có.
AIR-AP1810W-S-K9 mang lại hiệu suất hàng đầu cho các kết nối có dây hoặc không dây an toàn và đáng tin cậy cao, đồng thời mang đến trải nghiệm di động mạnh mẽ.

Product Details

Figure 1 shows the 360° appearance of the Cisco AIR-AP1810W.

Figure 2 shows the face and left side of AP.

Note:

① The Face of AP ③ 48V DC power port
② The Left side of AP ④ Kensington lock slot

Figure 3 shows the base of the AP with the ports and connectors.

Note:

① Console port ④ LAN port 2
② Passive Pass-Through port ⑤ PSE / LAN port 1
③ LAN port 3

· PSE / LAN port 1 provides 802.3af/at Power Sourcing Equipment (PSE) PoE-Out power on the LAN 1 Ethernet interface. With 802.3at input the PoE-Out is 6.95W (Class 2).With DC input the PoE-Out is 12.95W (Class 0).

Table 2. Cisco Aironet 1810W series access points can be mounted directly on the wall, to numerous global wall junction standards, or on a desk.

Type of Mounting Mounting Bracket or Kit to be Used
Wall-mount installation on a single gang junction box or multiple international standards. AIR-AP-BRACKET-W2

This bracket is shipped with the access point as standard. A spare can also be ordered from Cisco.

Wall-mount installation directly on wall, where standard junction boxes are not available. AIR-AP1810W-KIT= spacer kit

This is kit includes an RJ-45 jumper cable and is separately available from Cisco.

Table-mount installation.

See Figure 4.

AIR-OEAP1810-CRD= cradle kit

This is kit includes a back cover, RJ-45 jumper cable and is separately available from Cisco.

☆ AIR-AP1810W includes a Wall Mounting bracket ( AIR-AP-BRACKET-W2) and has a number of Accessory options which are sold separately and can be ordered as spares.

Figure 4. Table-mount installation.

Note:

① The AP
② AIR-OEAP1810-CRD= cradle kit
③ Mounting the AP in the Cradle

Cisco Aironet AP1810W series access points can be mounted on a table or horizontal surface, using the AIR-OEAP1810-CRD= cradle kit. This kit is shipped with the access point as standard and includes a back cover and an RJ-45 jumper cable. It is also separately available from Cisco as a spare.

Part Number AIR-AP1810W-S-K9
Description 802.11ac Wave 2 Access Point, 2x2:2, 3 GbE, S Regulatory Domain
Features
  • 2x2 single-user/multiuser MIMO with two spatial streams
  • Maximal ratio combining (MRC)
  • 20-, 40- and 80-MHz channels
  • PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)
  • 802.11 Dynamic Frequency Selection (DFS)
  • Cyclic shift diversity (CSD) support
Interfaces
  • One 10/100/1000BASE-T PoE uplink port
  • Management console port (RJ-45)
  • Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port: PoE out provides 802.3af when access point is powered by Cisco local power supply (AIR-PWR-C=, AIR-PWR-D=), or ~6.5W when powered by 802.3at, or no output when powered by 802.3af
  • One passive pass-through port RJ-45 (back to bottom)
  • DC power connector
Dimensions (W x L x H) 6.5 x 4.5 x 1.6 in. (165 x 114 x 41 mm)
Weight 1.2 lb (560 g)

Giao hàng toàn quốc. Chúng tôi sử dụng các dịch vụ giao hàng và thanh toán tại nhà (COD) của Giaohangtietkiem, Viettel Post, GHN và những dịch vụ khác để giao hàng đến quý khách hàng trong thời gian sớm nhất.

Sản phẩm liên quan