Trung Quốc
Thương hiệu:
Hikvision
LYTE II DIN Rail Power Supply HIKVISION DRL-48V240W1EN
Hàng chính hãng
Giá:
Liên hệ
- Tình trạng
- Hàng chính hãng, có CO CQ đầy đủ
- Part Number
- LYTE II DIN Rail Power Supply HIKVISION DRL-48V240
- Kho hàng
- Liên hệ
- Mua nhiều
- Khách hàng cần mua số lượng vui lòng liên hệ 0777621381 - 0396827937 để có giá tốt.
Vận chuyển
Giao hàng toàn quốc. Chúng tôi sử dụng các dịch vụ giao hàng và thanh toán tại nhà (COD) của Giaohangtietkiem, Viettel Post, GHN và những dịch vụ khác để giao hàng đến quý khách hàng trong thời gian sớm nhất.
LYTE II DIN Rail Power Supply HIKVISION DRL-48V240W1EN
- Input Voltage Range: 90-264Vac.
- Rated Output Voltage: 48Vdc.
- Rated Output Current: 5.0A.
- Universal AC input voltage range.
- Built-in constant current circuit for reactive loads.
- High power density.
- Operate from -30°C to +70°C with -40°C Cold Start.
- Reduced no-load power consumption.
- Compliance with DOE VI Energy Standard.
- Compliance to SEMI F47@200Vac.
Thông số kỹ thuật
| Input Ratings/Characteristics | |
| Nominal Input Voltage | 100-240Vac |
| Input Voltage Range | 90-264Vac |
| Nominal Input Frequency | 50-60Hz |
| Input Frequency Range | 47-63Hz |
| Input Current | 2.5A typ. @ 115Vac, 1.3A typ. @ 230Vac |
| Efficiency at 100% Load | 90.5% typ. @ 230Vac |
| Average Efficiency (25%, 50%, 75%, 100%) | 88% typ. @ 115Vac |
| No Load Power Consumption | 0.3W max @ 115Vac & 230Vac |
| Max Inrush Current (Cold Start) | 40A typ. @ 230Vac |
| Power Factor at 100% Load | > 0.95 @ 115Vac & 230Vac |
| Leakage Current | < 0.75mA @ 240Vac |
| Output Ratings/Characteristics | |
| Nominal Output Voltage | 48Vdc |
| Factory Set Point Tolerance | 48Vdc ± 1% |
| Output Voltage Adjustment Range | 43.2-52.8Vdc |
| Output Current | 5.0A |
| Output Power | 240W max |
| Line Regulation | ± 0.5% @ 115Vac & 230Vac |
| Load Regulation | ± 0.5% |
| PARD (20MHz) | < 200mVpp @ 0°C to +70°C < 600mVpp @ -30°C to 0°C |
| Rise Time | 30ms typ. @ 115Vac & 230Vac |
| Start-up Time | 500ms typ. @ 115Vac & 230Vac |
| Hold-up Time | 20ms typ. @ 115Vac (100% load) 20ms typ. @ 230Vac (100% load) |
| Dynamic Response (Overshoot & Undershoot O/P Voltage) | ± 10% @ 115Vac & 230Vac input, 10-100% load (Slew Rate: 2.5A/μS, 50% duty cycle @ 5Hz & 10KHz) |
| Start-up with Capacitive Loads | 3,000µF Max |
| Mechanical | |
| Case Cover / Chassis | SGCC/ Aluminum |
| Dimensions (L x W x D) | 123.6 x 40 x 117.2 mm |
| Unit Weight | 0.62 kg |
| Indicator | Green LED (DC OK) |
| Cooling System | Convection |
| Terminal | Input: 3 Pins (Rated 300V/30A) Output: 4 Pins (Rated 300V/20A) |
| Wire | Input: AWG 18-12 (Current rating can refer to “AWG Wire Table”) Output: AWG 18-12 (Current rating can refer to “AWG Wire Table”) |
| Mounting Rail | Standard TS35 DIN Rail in accordance with EN 60715 |
| Noise (1 Meter from power supply) | Sound Pressure Level (SPL) < 25dBA |
| Environment | |
| Surrounding Air Temperature | Operating: -30°C to +70°C (-40°C Cold Start) Storage: -40°C to +85°C |
| Power De-rating | Temperature: > 40°C de-rate power by 1.67 % / °C @115Vac > 50°C de-rate power by 2.5 % / °C @230Vac Input Voltage: < 100Vac de-rate power by 1% / Vac |
| Operating Humidity | 20 to 90% RH (Non-Condensing) |
| Operating Altitude | 0 to 5,000 Meters |
| Shock Test | Non-Operating: IEC 60068-2-27, Half Sine Wave: 50G for duration of 11ms; 3 times per direction, 9 times in total Operating: IEC 60068-2-27, Half Sine Wave: 10G for duration of 11ms; 1 time in X axis |
| Vibration | Non-Operating: IEC 60068-2-6, Random: 5Hz to 500Hz (2.09G); 20 min per axis for all X, Y, Z direction Operating: IEC 60068-2-6, Sine Wave: 10Hz to 500Hz @ 19.6 m/s² (2G peak); 10 min per cycle, 60 min for X direction |
| Over Voltage Category | II (Compliance to EN 62477-1 OVC III with 2000 meters altitude) |
| Pollution Degree | 2 |
| Protections | |
| Overvoltage | <64.8V, SELV Output, Latch Mode |
| Overload / Overcurrent | 105 - 150% of rated load current, Auto-recovery Continuous current limit Mode*5 (Vo>80%) |
| Over Temperature | Latch Mode |
| Short Circuit | Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed) |
| Protection Against Shock | Class I with PE connection |
- Bảo hành: 24 tháng.
LYTE II DIN Rail Power Supply HIKVISION DRL-48V240W1EN
- Input Voltage Range: 90-264Vac.
- Rated Output Voltage: 48Vdc.
- Rated Output Current: 5.0A.
- Universal AC input voltage range.
- Built-in constant current circuit for reactive loads.
- High power density.
- Operate from -30°C to +70°C with -40°C Cold Start.
- Reduced no-load power consumption.
- Compliance with DOE VI Energy Standard.
- Compliance to SEMI F47@200Vac.
Thông số kỹ thuật
| Input Ratings/Characteristics | |
| Nominal Input Voltage | 100-240Vac |
| Input Voltage Range | 90-264Vac |
| Nominal Input Frequency | 50-60Hz |
| Input Frequency Range | 47-63Hz |
| Input Current | 2.5A typ. @ 115Vac, 1.3A typ. @ 230Vac |
| Efficiency at 100% Load | 90.5% typ. @ 230Vac |
| Average Efficiency (25%, 50%, 75%, 100%) | 88% typ. @ 115Vac |
| No Load Power Consumption | 0.3W max @ 115Vac & 230Vac |
| Max Inrush Current (Cold Start) | 40A typ. @ 230Vac |
| Power Factor at 100% Load | > 0.95 @ 115Vac & 230Vac |
| Leakage Current | < 0.75mA @ 240Vac |
| Output Ratings/Characteristics | |
| Nominal Output Voltage | 48Vdc |
| Factory Set Point Tolerance | 48Vdc ± 1% |
| Output Voltage Adjustment Range | 43.2-52.8Vdc |
| Output Current | 5.0A |
| Output Power | 240W max |
| Line Regulation | ± 0.5% @ 115Vac & 230Vac |
| Load Regulation | ± 0.5% |
| PARD (20MHz) | < 200mVpp @ 0°C to +70°C < 600mVpp @ -30°C to 0°C |
| Rise Time | 30ms typ. @ 115Vac & 230Vac |
| Start-up Time | 500ms typ. @ 115Vac & 230Vac |
| Hold-up Time | 20ms typ. @ 115Vac (100% load) 20ms typ. @ 230Vac (100% load) |
| Dynamic Response (Overshoot & Undershoot O/P Voltage) | ± 10% @ 115Vac & 230Vac input, 10-100% load (Slew Rate: 2.5A/μS, 50% duty cycle @ 5Hz & 10KHz) |
| Start-up with Capacitive Loads | 3,000µF Max |
| Mechanical | |
| Case Cover / Chassis | SGCC/ Aluminum |
| Dimensions (L x W x D) | 123.6 x 40 x 117.2 mm |
| Unit Weight | 0.62 kg |
| Indicator | Green LED (DC OK) |
| Cooling System | Convection |
| Terminal | Input: 3 Pins (Rated 300V/30A) Output: 4 Pins (Rated 300V/20A) |
| Wire | Input: AWG 18-12 (Current rating can refer to “AWG Wire Table”) Output: AWG 18-12 (Current rating can refer to “AWG Wire Table”) |
| Mounting Rail | Standard TS35 DIN Rail in accordance with EN 60715 |
| Noise (1 Meter from power supply) | Sound Pressure Level (SPL) < 25dBA |
| Environment | |
| Surrounding Air Temperature | Operating: -30°C to +70°C (-40°C Cold Start) Storage: -40°C to +85°C |
| Power De-rating | Temperature: > 40°C de-rate power by 1.67 % / °C @115Vac > 50°C de-rate power by 2.5 % / °C @230Vac Input Voltage: < 100Vac de-rate power by 1% / Vac |
| Operating Humidity | 20 to 90% RH (Non-Condensing) |
| Operating Altitude | 0 to 5,000 Meters |
| Shock Test | Non-Operating: IEC 60068-2-27, Half Sine Wave: 50G for duration of 11ms; 3 times per direction, 9 times in total Operating: IEC 60068-2-27, Half Sine Wave: 10G for duration of 11ms; 1 time in X axis |
| Vibration | Non-Operating: IEC 60068-2-6, Random: 5Hz to 500Hz (2.09G); 20 min per axis for all X, Y, Z direction Operating: IEC 60068-2-6, Sine Wave: 10Hz to 500Hz @ 19.6 m/s² (2G peak); 10 min per cycle, 60 min for X direction |
| Over Voltage Category | II (Compliance to EN 62477-1 OVC III with 2000 meters altitude) |
| Pollution Degree | 2 |
| Protections | |
| Overvoltage | <64.8V, SELV Output, Latch Mode |
| Overload / Overcurrent | 105 - 150% of rated load current, Auto-recovery Continuous current limit Mode*5 (Vo>80%) |
| Over Temperature | Latch Mode |
| Short Circuit | Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed) |
| Protection Against Shock | Class I with PE connection |
- Bảo hành: 24 tháng.
Giao hàng toàn quốc. Chúng tôi sử dụng các dịch vụ giao hàng và thanh toán tại nhà (COD) của Giaohangtietkiem, Viettel Post, GHN và những dịch vụ khác để giao hàng đến quý khách hàng trong thời gian sớm nhất.
Sản phẩm liên quan
